Arlon SLX®+ Premium Cast Vehicle Wrap Film

Q: What makes FLITE Technology different from standard air-egress?

A: FLITE Technology features a low-profile air-egress pattern combined with optimal initial tack adhesive. This combination provides superior repositionability, effortless snap-up on large panels, quick anchoring once positioned, and easier liner release—making installation significantly faster and more forgiving than standard films.

Q: Can one person really wrap a vehicle with SLX®+?

A: Yes! The superior repositionability means one installer can position and adjust panels without help. Quick anchoring keeps the film in place once positioned. The snap-up technique enables rapid coverage. While some areas always benefit from a helper, SLX®+ makes solo wrapping far more feasible than traditional films.

Q: What does "all-season" mean for a wrap film?

A: SLX®+ installs easily in both hot (up to 90°F) and cold (down to 50°F) conditions. The moderate-tack adhesive with quick-flow characteristics adapts to temperature variations. You're not limited to perfect weather—install year-round with consistent results.

Q: How small can I cut letters with SLX®+?

A: SLX®+ is designed for cutting and weeding letters 2" (5 cm) or greater. The film cuts cleanly and weeds accurately at this size range, making it ideal for vehicle decals, fleet lettering, and print-to-cut production.

Q: Can I wrap stainless steel with SLX®+?

A: Yes, SLX®+ is optimized for stainless steel applications (smooth surfaces only). However, clean removability is NOT guaranteed and Arlon does not warranty against discoloration or staining. Always test first and inform customers of potential risks.

Q: What's the difference between the gray adhesive and clear adhesive?

A: The tinted gray adhesive provides excellent opacity, preventing vehicle color show-through on light-colored graphics. This ensures colors appear true and consistent regardless of the underlying vehicle color.

Q: Do I need to overlaminate SLX®+?

A: Overlamination is highly recommended for printed graphics. It protects the print from UV, scratches, chemicals, and environmental damage. SLX®+ is compatible with Series 3270, 3210, 3220, 3310, and 3200 overlaminates.

Q: Why is post-heating so important?

A: Post-heating to 203°F-221°F surface temperature is critical. It activates the adhesive for maximum bond, locks the film in place around complex curves and channels, and ensures long-term performance. Always post-heat all edges, seams, and complex areas.

Q: How does moderate tack compare to high tack?

A: Moderate tack provides the optimal balance—not so aggressive that it grabs immediately (making repositioning impossible), but not so light that it won't anchor (causing shifting during installation). It's the "goldilocks" adhesive strength for professional wrap installation.

Q: Will SLX®+ work on curves and channels?

A: Absolutely! With 190% elongation and premium cast construction, SLX®+ excels at conforming around rivets, complex curves, deep channels, and other challenging areas. Proper heat application is key to achieving complete conformability.

Q: How do I remove SLX®+ wraps?

A: Use heat and/or chemical removers with appropriate vinyl removal techniques. The film removes cleanly when proper methods are used. Reference Arlon's Fleet & Vehicle Wrap Removal Tip #44 for detailed instructions.

Q: Why do vertical surfaces last longer than horizontal?

A: Vertical and upper-outboard surfaces receive less direct UV exposure, less moisture accumulation, and less contamination from road grime and pollutants. Horizontal surfaces (like hoods and roofs) face maximum UV and environmental stress, shortening their life.